- Overview
- Product Description
- Detailed Photos
- Product Parameters
- Company Profile
- Certifications
- Packaging & Shipping
Basic Info.
Model NO.
COT215E-COK04
Brightness
250-1000nits
Prot
VGA,DP,HDMI,Remote OSD
Touch Point
10 Touch Points
Transport Package
2 Units in One Carton
Specification
total 16kg for two unit touch monitor
Trademark
CJTouch
Origin
Dongguan
HS Code
8528591090
Production Capacity
1000pieces/Month
Packaging & Delivery
Package Size
59.00cm * 17.00cm * 48.00cm
Package Gross Weight
9.000kg
Product Description
21.5 Inch Industrial LCD Display PCAP Touch Screen Monitor
- Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
- For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
- Keep this equipment away from humidity.
- Put this equipment on a reliable surface during installation. Dropping it or letting if fall may cause damage.
- The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
- Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
- Position the power cord so that people cannot step on it . Do not place anything over the power cord.
- All cautions and warnings on the equipment should be noted.
- If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over voltage.
- Never pour any liquid into an opening. This may cause fire or electrical shock.
- Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
- If one of the following situations arises, get the equipment checked by service personnel:
- The power cord or plug is damaged.
- Liquid has penetrated into the equipment.
- The equipment has been exposed to moisture.
- The equipment does not work well, or you cannot get it to work according to the user's Manuel.
- The equipment has been dropped and damaged.
- The equipment has obvious signs of breakage.
13. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -10ºC OR ABOVE 50ºC. THIS MAY DAMAGE THE EQUIPMENT.
| General Specifications | |||
| Model | COT215E-COK04 | ||
| Series | Open Frame,IP65 Water-proof & Vandal Proof | ||
| LCD Type | 21.5" a-Si TFT-LCD | ||
| Video Input | VGA, DP , HDMI and Remote OSD | ||
| OSD controls | Brightness, Contrast Ratio, Auto-adjust, Phase, Clock, H/V Location, Languages, Function, Reset | ||
| Power Supply | Type: External brick | ||
| Input (line) voltage: 100-240 VAC, 50-60 Hz | |||
| Output voltage/current: 12 volts at 4 amps max | |||
| Mount Interface | 1)VESA 75mm and 100mm | ||
| 2)Mount bracket, horizontal or vertical (Kiosk Mounting) | |||
| LCD Specification | |||
| Active Area(mm) | 476.64(H)×268.11(V) | ||
| Resolution | 1920(RGB)×1080 (60Hz) | ||
| Pixel Pitch(mm) | 0.24825(H)×0.24825(V) | ||
| Viewing angle (v/h) | 89°/89°/89°/89°(CR>10) | ||
| Contrast | 1000:1 | ||
| Luminance(cd/m2) | 250 | ||
| Response Time(Rising) | 3.6ms/1.4ms | ||
| Support Color | 16.7M colors | ||
| Backlight MTBF(hr) | 50000 | ||
| Touchscreen Specification | |||
| Type | CJTouch Projected Capacitive touch screen with 3mm Vandal Proof Glass | ||
| Multi touch | 10 points touch | ||
| Touch Life Cycle | 50 millions | ||
| Touch Response time | 7ms | ||
| Touch System Interface | USB interface | ||
| Power consumption | +5V@80mA | ||
| External AC Power Adapter | |||
| Output | DC 12V /4A | ||
| Input | 100-240 VAC, 50-60 Hz | ||
| MTBF | 50000 hr at 25°C | ||
| Environment | |||
| Operating Temp. | -10~55°C | ||
| Storage Temp. | -20~60°C | ||
| Operating RH: | 20%~80% | ||
| Storage RH: | 10%~90% | ||
Dongguan CJTouch Electronic Co., Ltd. is a leading provider of Touchscreen, Touch monitor and All-in-one computers. Established in 2009 and headquartered in Dongguan, China, CJTouch has proven to be reliable and trustworthy partners to help seamlessly integrate our products into your total solution.
Over 10 years of combined experience in researching and developing touch-enabled screens and monitors.Two factories with over 200 skilled and qualified employees, including R & D engineers, technical experts and sales representatives.
Production workshop
IR touch screen/Frame
SAW touch screen
PCAP touch screen panel
4wire/5wire resistive touch screen
PCAP/NANO touch foil/film
PCAP flat screen touch monitor
SAW touch screen monitor
IR Open frame touch display
Desktop touch monitor
Desktop all in one touch PC
PCAP all in one touch computer
Bar lcd panel
High brightness advertising player/advertising machine
Curved touch display
Full bonding TFT lcd panel with touch screens
Touch monitor with mirror
OEM/ODM/Customization
